- 15%

WOHOOH Universal OBD2 Scanner Engine Fault Reader, Read Clear Codes with LCD Display, View Freeze Frame Data, I/M Readiness Smog Check CAN Diagnostic Scan Tool, 5 Language Support

TURN OFF CHECK ENGINE LIGHT: WOHOOH OBDII scanner is an easy-to-use plug-n-play check engine code reader that read and clear codes. This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light).
FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This obd2 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc.
READINESS STATUS TO PASS SMOG CHECK: The WOHOOH car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annual smog check.

Amazon.co.uk Price:  £14.43 (as of 08/09/2020 23:15 PST- Details)

BUY

Colour Name:red

Product description

Safety measures and warning

For preventing physical injuries, or causing damage for the vehicles and decoder, please read this operating manual before using the instrument on the vehicle, and comply with the following safety measures:

∙Detection shall be carried out in safe environment.
∙Wear the eye protective device accorded with ANSI standard.
∙Keep clothes, hair, hands, tools, test equipment away from all motor heating components.
∙Operate the vehicle in a well-ventilated area: waste gas is harmful to the human body.
∙Place a block plate in the front of the drive wheel, make sure the vehicle is guarded during operating the test.
∙Be more careful when operating near the ignition wire and spark plug of ignition coil distributor cover.
These components will generate the dangerous voltage when the engine is running.
∙Place the gearbox in PARK (automatic gearbox) or NEUTRAL (manual gearbox), and make sure the parking brake is connected.
∙Put the fire extinguishers applied to petrol/ chemical electrical fire near it.
∙Do not connect or disconnect any test equipment when ignition switch is opening or engine is running.
∙Keep decoder dry, clean, not adhere oil / water or lubricants. Wipe the decoder by a clean with the gentle cleaner if necessary.

Specification

Display: Badit, 128 * 64 pixel display
Working temperature: 0~60℃ (32~140℉) S
Storage temperature: -20~70℃ (-4~158℉)
External power supply: Vehicle batteries supply 8.0 to 15.0V

Included accessories

User’s manual – Tool operating instruction
OBD2 wire – Supply power to the tool, and communicate between tool and vehicle

Legal Disclaimer

Application range of vehicle: This OBD II / EOBD decoder is specially applied to all the vehicles that accorded with OBD II standard, including the vehicles for preparing the next generation of protocols – controlling the area network (have the capacity). All the vehicles selling in USA as required by United States Environmental Protection Agency, and 1996 newer (automobile) light trucks must be accorded with OBD II standard. Including all the domestic, Asian and European vehicles.A small amount of 1994 and 1995 petrol vehicles are accorded with OBD II standard. If need to verify if 1994 or 1995 vehicles are accorded with OBD II standard, please check the vehicle emission control information (VECI) label, most vehicles are stuck this label under the engine jacket or near the radiator. If the vehicle is accorded with OBD II standard, and then its label is marked with “OBD II certification”. In addition, the government laws and regulations require all the vehicles that are accorded with OBD II standard must have “General” 16 pin data link connector (DLC).If your vehicle is accorded with OBD II standard, there must a 16 pin DLC (data link connector) below the instrument panel, and a vehicle emission control information label states the vehicle is accorded with OBD II standard.

TURN OFF CHECK ENGINE LIGHT: WOHOOH OBDII scanner is an easy-to-use plug-n-play check engine code reader that read and clear codes. This little code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes and displays DTC definitions on the TFT screen. It can check engine related fault codes, easily find out what caused the check engine light comes on, turn off MIL light(Malfunction Indicator Light).
FREEZE FRAME DATA FOR ACCURATE DIAGNOSIS: This obd2 check engine code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive cycle verification time. It includes important engine parameters such as RPM, vehicle speed, mass airflow, engine load, fuel pressure, short/long term fuel trim, engine coolant temperature and etc.
READINESS STATUS TO PASS SMOG CHECK: The WOHOOH car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles. It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP system and etc, making this OBD2 scan tool an excellent scan tool to help get your vehicle ready to pass the annual smog check.
The OBD2 code scanner is compatible (Supporting EU cars after 2000 and diesel cars after 2004), passenger cars or light trucks compatible! ! This product does not support ABS protocol, SRS protocol and TPMS private protocol.
RETRIEVE VEHICLE INFO: The automotive OBD2 scanner enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car when you are buying a used car. The WOHOOH auto car scanner comes with LIFETIME FREE software updates and is backed by 45 Day Money Back and 12 Months Seller . Purchase now and go fix something!

Specification: WOHOOH Universal OBD2 Scanner Engine Fault Reader, Read Clear Codes with LCD Display, View Freeze Frame Data, I/M Readiness Smog Check CAN Diagnostic Scan Tool, 5 Language Support

Manufacturer

Brand

Package Dimensions

Manufacturer reference

Manufacturer Part Number

Item Weight

Date First Available

My Online SuperMarket Store
Logo
Enable registration in settings - general

Do you want to ship the item(s) you’re buying here oversea or you’re not based in the UK but you’ll like your item shipped oversea after your purchase ? Then I have a good news for you! As a cargo company, we will give you 10% Discount off your shipping cost when you buy through this website. Plus you can even buy the item and get it delivered to our warehouse for onward forwarding to your desired destination abroad.